|
|
TURBOBOND Filler - chemical weld
Characteristics:
For bonding and filling, tears, joints, cracks, holes, etc.
in combination with TURBOBOND Powerglue.
Application:
Either apply the TURBOBOND Filler or TURBOBOND Powerglue first
(do not mix). The TURBOBOND Powerglue immediately reacts with
the TURBOBOND Filler. After the reaction, there is no time
to make a correction. Apply in layers of approx. 2mm and make
sure that the TURBOBOND Filler is completely saturated with
the TURBOBOND Powerglue. Repeat adding TURBOBOND Filler and
TURBOBOND Powerglue if necessary. Blind off holes or corners
with adhesive tape. After hardening remove the adhesive tape.
The material can be mechanically processed after approx. 3
minutes eg. sanding and painting.
Do not let the two tube tips get in contact with each other
to avoid clogging.
Storage:
Store dry.
Non-aging.
Size:
Available in 15g, 30g Bottles. |
|
|
|
Put on TURBOBOND
Filler and soak thoroughly with TURBOBOND Powerglue. |
| The stability of a joint like
this, which is usually impossible, can be obtained by using
TURBOBOND Filler. |
| Knocked out or broken
off materials can be refilled using TURBOBOND Filler and TURBOBOND
Powerglue. |
| TURBOBOND Powerglue
in combination with, TURBOBOND Filler is perfect to refill
and replace broken off material of any kind. |
|
|